显示标签为“spindle bearing”的博文。显示所有博文
显示标签为“spindle bearing”的博文。显示所有博文

2015年4月13日星期一

Stringent requirements for precision bearings under the development of high speed spindle



High speed spindle bearing is particularly important, especially in order to meet the increasing requirement of processing speed, the development of high speed bearing spindle including electric spindle, and continuous improvement, more and the requirement of high speed of spindle bearing higher.

  If the agricultural bearings are not good,it will be very serious rise of spindle system temperature, and even burned failure.


2015年4月10日星期五

The selection of super precision bearings P4 and above level


Mr. Chen Shiwei said that the radial spindle bearing beating, face runout, rolling body diameter inconsistent form and position error will affect the spindle system and its processing accuracy of parts is serious, so the accuracy of precision machine tool spindle bearing for the P5 and the superior, but for the spindle bearing of CNC machine tools, machining center and so on high speed and high precision machine tool and you need to use P4 and above level super precision bearings .


2015年2月26日星期四

spindle bearing needi

spindle bearing needing preload is generally as angular contact ball bearings front bearing use.
angular contact ball bearing is generally used in groups, pre tightening in two ways,
1, bearing between the spacer sleeve, the top outer ring, inner ring with pressure pretightening nut.
2, at the end of main shaft side top outer ring, inner ring with a pre tightening nut pressure behind.
Methods 1 septum sleeve ends parallel precision must be very good. Mode 2, pressure ring side of the shaft is vertical to very good accuracy.
On the vertical accuracy requirements of bearing side with the thread of the locking nut is also high.
In addition, bearing must not install anti, anti loaded words bearing will be pressed powder.Note that the pre tension (or preload) must meet the requirements of bearing the instructions, otherwise it will damage the bearing.


2014年12月31日星期三

"Eleventh Five-Year" bearing industry product development focus


During the "Eleventh Five-Year", bearing product development focus is mainly focused on the host supporting bearings and high-tech bearings.

     A focus on host supporting agricultural bearings

① automotive bearings: focus on the development of a new generation of high-end cars with wheel load bearing, water pump bearing, clutch release bearings, air-conditioning compressor bearings, constant velocity joints and heavy-duty truck axle bearings.
② motorcycle bearing: focus on the development of import substitution, export expansion motorcycle bearing.
③ household appliances bearing: focus on the development of household appliances with low-noise motor bearings.
④ railway vehicles bearing: focus on the development of quasi-high speed railway passenger cars, locomotives bearing and speed railway wagons bearing.
⑤ metallurgical and mining machinery marine crane bearing  focus on the development of plate mill roller bearings, bearing backing and high-speed wire rod mill bearings.
⑥ petrochemical machinery bearings: focus on the development of deep drilling rig, harsh offshore rig driller and bearings.
⑦ motor bearings: focus on the development of medium and large-scale low-noise motor bearings.
⑧ machine tool bearings: focus on the development of various types of CNC machine tool spindle, spindle machining center with precision bearings.
⑨ engineering machinery bearings: focus on the development of construction machinery with a long life, high reliability, cylindrical, conical and spherical roller bearings.
⑩ export bearings: focus on the development of high-tech, high value-added, access to foreign markets bearings.

2014年12月24日星期三

Machine tool industry demand for bearings




     Rolling use on the machine is mainly used for the following three parts: spindle, ball screw and general drive shaft.

     Machine tool spindle angular contact ball bearing as the basis for spare parts, its performance directly affects the speed of the machine, rotary precision, rigidity, resistance to cutting chatter vibration, noise, temperature and thermal deformation, thereby affecting the accuracy, surface quality of machined parts and so on. Therefore, the performance of the machine must be equipped with a high-performance bearings.

     Accuracy of rolling bearings is generally divided into P0, P6, P5, P4 and P2 five grades for the accuracy of precision machine tool spindle bearings should be P5 level and above, and for CNC machine tools, machining centers and other high-speed, high-precision machine tools spindle bearing, you need to choose P4 and above the level of ultra-precision high precision ball bearings.

     Machine tool spindle bearings typically include deep groove ball bearings, angular contact ball bearings, cylindrical roller bearings, angular contact thrust ball bearings, tapered roller bearings and thrust bearings and other six kinds of structure types.

     With the rapid development of numerical control technology, "complex, high-speed, intelligent, sophisticated, green" has become the main trend of the machine tool industry technology development. Among them, the high-speed processing can improve the machining efficiency and shorten the processing cycle of the workpiece. This requires the spindle and its associated components to adapt to the needs of high-speed machining. Currently, the CNC machine tool spindle bearings are basically limited angular contact ball bearings, cylindrical roller bearings, angular contact thrust ball bearings and tapered roller bearings and other types of four structures.

     With the CNC machine tool spindle to speed the development of ceramic materials (mainly Si3N4 ceramic works) due to having low density, high elastic modulus, thermal expansion coefficient, wear resistance, high temperature resistance, corrosion resistance, excellent performance, making it manufactures high-speed ideal material for precision bearings. Ceramic bearings are more widely used, given the difficult process of ceramic materials, precision ceramic bearing rolling elements are mostly ceramics, chrome steel inner and outer rings still manufactured hybrid ceramic ball bearings.

     As a precision ball screw, efficient and sensitive transmission components, should be used in addition to high-precision screw, nut and ball, we must also pay attention to the choice of the axial stiffness, friction torque, high running accuracy of the bearing. Ball bearing used in the past two-way thrust angular contact ball bearings, tapered roller bearings, needle roller and thrust roller bearings, deep groove ball bearings and thrust ball high precision bearings  Currently, ball bearing using the most is the contact angle of 60 ° single row angular contact ball bearings and precision to P4 and above grade level is based.

     Rolling general machine tools installed in the drive shaft, the requirements and selection and general machinery drives bearing the same, just to meet the strength and durability requirements, speed does not exceed the speed limit can be specified in the bearing.

     Under normal circumstances, we mentioned refers to the machine bearing spindle bearings and ball screw bearings, precision machine tool bearings refers to the accuracy level above P5 and P5 screw spindle bearings and bearings.

2014年12月3日星期三

Precision bearings is the future direction of miniature bearings


Miniature bearings are generally used with the host supporting industries, including the automotive, appliance, medical equipment and other industries, the development of related industries will drive the demand of the industry.

China's auto market in recent years has maintained a trend of rapid growth, from car ownership per capita household income, per capita car ownership and other factors to consider, cars still in the incremental market, not into the stock market. According to Prospect Industrial Research Institute released "Chinese precision spindle bearings manufacturing industry sales demand forecast 2015-2020 and upgrade analysis report" shows that the automotive industry is still holding period of high growth, future growth of not less than 15%.
With the miniaturization of electric car process, the corresponding components of products is increasing. Thus, car-related components market will continue to expand. Automotive bearings of the development, will focus on safety, improve efficiency and reduce harmful substances. Car radiator cooling fan motor, wiper motor, exhaust gas recirculation system (EGR) valve frame and anti-lock braking system (ABS) as the representative of the pump motor and its application system is the main application field of miniature bearings.

In particular ABS spindle bearing, in the 1980s, is used only for luxury cars, after which advance to the direction of miniaturization and popularity as an important product safety measures, from the mid-1990s began expanding use. At present, the development of the multi-purpose vehicle spindle, safety direction, not only for the use of ABS brakes intermittently control, but also with sensors to monitor driving conditions even move to a different drive wheel braking force all around, from the overall control safe driving. The future development trend of miniature bearings such a system is upgraded ABS system, different manufacturers have different product names such as ESC, EPS, VSC and so on.
Development of the ABS system is a typical example of the development of automotive-related products. Miniature bearings future with the increasing safety and environmental requirements, will derive many new applications. Bearing market targeting hybrid and electric cars will try to create a new type of automobile-related products. In this development, the field of miniature bearings involved will continue to expand its precision will continue to increase, with the continuous development of China's auto industry, a huge space for development of domestic enterprises.

Market size of China's home appliance industry has expanded each year, the growth rate has declined in recent years, prospective Industry Research Institute expects the market size of China's home appliance industry will continue to expand year by year.
Appliances with miniature bearings representative products are vacuum cleaners and air conditioners motor bearings, mainly the outer diameter of 22mm motors. Vacuum cleaner is characterized by its number of revolutions of the motor up to 4-5 million revolutions / min, and 100 000 turn / min motor has also been used to market a large number of sales of vacuum cleaner. The air conditioner is a long time in the device for indoor use, low noise high demands. Currently there is a problem, the power lead to galvanic corrosion between the inner and outer ring of the bearing, the solution is to use only non-conductive ceramic balls, which will enhance the miniature bearings used in home appliance technology.

In recent years, the market size of China's medical device industry to maintain rapid growth. Prospect Industrial Research Institute expects China's medical device industry will maintain a growth rate of over 20%.
In medical devices, bearings use also involves many aspects, mainly for artificial dialysis blood pump, drug infusion pump, ventilator air pump and other equipment. These devices use the pillow in bed, it must be low-noise processing. An extreme example is the use of dental dentist drill, drill 40-50 ten thousand revolutions per minute, the doctor at the treble stimulus is hard to bear. Medical device bearing a major issue is that the bearing of the drug and the acid corrosion resistance, which is a subject of the bearing material can not be separated.

From the above applications bearing the future development trend shows, miniature bearings are mainly towards sophisticated, bass and other direction, so the future direction of development of precision bearings. Given the wide range of precision bearing applications, the development of all walks of life of the bearing accuracy, performance, reliability and other aspects of life and the increasingly high demand, the number of required more and more. However, domestic production of precision miniature bearings in is still the weak link, according to the statistics, since the rate of precision miniature bearings with only 40% of the domestic had to spend a lot of foreign exchange to import precision miniature bearings annually, of which the majority of high-speed electric main spindle bearings To rely on imports. In recent years, China's domestic machine tool industry, the automobile industry has developed rapidly, to adapt to the needs of product upgrades and import substitution, our precision miniature bearings market prospects.

2014年11月24日星期一

Selection Method precision machine tool spindle bearings

Rolling use on the machine is mainly used for the following three parts: the spindle, ball screws and general drive shaft. First, the rotation accuracy of precision rolling bearings for machine tool spindle system accuracy precision machine tool spindle bearings on the P5 and above level should be, and for machine tools, machining centers, high-speed, high-precision machine tool spindle bearings, P4 and above should be used Ultra precision bearings.
Rolling use on the machine is mainly used for the following three parts: the spindle, ball screws and general drive shaft.
First, the accuracy of precision machine tool spindle rotation system Machining centers, high-speed, high-precision machine tool spindle rolling mill bearing should be used in P4 and above-grade super-precision bearings. Machine tool spindle bearings as the basis for matching pieces, and its performance directly affects the speed of the machine, rotary precision, rigidity, resistance to cutting chatter vibration, noise, temperature and thermal deformation, thereby affecting the accuracy, surface quality of machined parts and the like. Therefore, high-performance machine must be equipped with high-performance bearings.
Precision spindle rotation system means that the machine is idling at a low speed manual or motorized rotating case, the measurement reference plane radial front spindle runout, section runout and axial movement of accuracy.Precision spindle system is mainly affected by the following factors Radial runout channel bearing rings, corresponding to the precision spindle bearings axis of the spindle system is radial runout, so that the complex part of the errors of these enantiomers on the surface being processed.
Diameter rolling element bearings inconsistencies and shape error will cause the spindle to produce a regular errors.
The axial end surface of the channel on the side of the pendulum will cause the spindle runout, axial play of the spindle for precision grinding machines, especially spindle bearing
 grinder influence was particularly notable, if tributary Mogou way using the process, will make the rejection rate improved significantly, the noise will be greatly improved.
Size and shape make errors bearing mounting face bearing raceway produce the corresponding deformation, so that the bearing inner and outer rings tilted so that the stiffness of the bearing in each direction is inconsistent, which will reduce the rotational accuracy spindle system. Gap adjustment nut, the spacer, the washer is required for grinding the end face and perpendicular to the axis of rotation of the shaft and the bearing installation accuracy corresponding, otherwise it will decrease the working accuracy of the bearing.
Second, the precision machine tool spindle lubrication and seal Earlier we mentioned the lubricant is an important part of the bearing arrangement, different lubrication, speed limit data bearing is different. In accordance with the design requirements lubricant replenish (High Speed ​​Precision Spindle grease filling amount is generally 10% to 20% of the bearing space), reasonable lubricant can reduce friction and wear shafting, extend the fatigue life of the bearing, frictional heat can be discharged simultaneously bearing system and play a role in cooling the bearing system; in addition to the grease, as well as liquid lubricating oil lubrication, oil mist lubrication and oil lubrication, etc. bearing system, oil lubrication system in which high-speed spindle abroad has been widely used, fuel oil lubrication, no pollution, and can significantly increase the DN value of the spindle system, and is able to intelligently control shaft lubricant requirements recharge.
Spindle structure design, lubrication and sealing must take different forms depending on the situation. Timely replacement of worn seals, seal lip contact with the rotating body at more than 15m / s is necessary to use non-contact sealing structure, high-speed precision machine tools they use a labyrinth, and the need to dump oil in place designed grooves, because contact Not only will seal sealing contact friction loss and overheating at, but will impact on the bearing system rotation accuracy.
Third, as a precision ball screw, efficient and sensitive transmission components, should be used in addition to high-precision screw, nut and ball, we must also pay attention to the choice of the axial stiffness, low friction torque, high operating precision bearings. Ball bearing used in the past two-way thrust angular contact ball bearings, tapered roller bearings, needle roller and thrust roller bearings, deep groove ball bearings and thrust ball bearings. Currently, ball bearing using the most is the contact angle of 60 ° single row angular contact ball bearings, and precision grade is mainly to P4 level and above.